Polycom RealPresence Group Series Documentation page 43

2 Navigate to
3 Select a viewing mode from the Multipoint Mode list.
Related Topics
Multipoint Viewing Modes
Multipoint Viewing Layouts
What you see during a multipoint call can vary depending on how the RealPresence Group Series is
configured, the number of sites participating, the number of monitors you are using, and whether
content is shared. The multipoint viewing layout configured on the host system is the one used in the
call for all endpoints in the call.
When you use two monitors of equal size, you can have eight-way multipoint calling, depending on
your system configuration. When you share content, one monitor is used for content and one for
people. The configuration varies depending on whether your administrator has enabled Self View and
how many people are participating. When you do not share content, the configuration for both monitors
is spread over both monitors.
To find out more about multipoint layouts, talk to the administrator of your RealPresence Group Series
system.
Note If you are not in a RealPresence® Collaboration Server (RMX®) system call, your only
layout option is Browse.
Related Topics
Video Adjustments
Change Multipoint Viewing Layout
You can change the multipoint viewing layout by browsing through the available options in the local
interface. The available layouts vary depending upon certain factors, such as how many participants
are in the call or the content status.
Procedure
1 While in a call, press
2 Select Near Video or Far Video.
3 Select an available layout for the call.
Related Topics
Multipoint Viewing Layouts
Printed from Polycom, Inc. (http://documents.polycom.com)
Settings > User Settings > Meetings.
, then select Layout.
Page 43