Recharge The Remote Control Battery - Polycom RealPresence Group Series Documentation

Remote Control Button Descriptions
Number Description
Generates dual-tone multi-frequency
16 (DTMF) touch tones. Press #, followed by
DTMF keys to send.
17 Mute or unmute a microphone.
Related Topics
Using a Polycom RealPresence Group Series Remote Control

Recharge the Remote Control Battery

When the remote control battery power is at 10% or less, a notification displays on the RealPresence
Group system Home screen.
You can charge the remote control battery using the system's USB port or any other device with a USB
port. The RealPresence Group 300, 310, and 500 systems have two USB 2.0 ports on the back of
each system, while the RealPresence Group 700 system has one USB 2.0 port on the front of the
system and two USB 3.0 ports on the back of the system.
Procedure
1 Pull the battery out of the end of the remote control.
2 Insert the USB plug of the battery into a USB 2.0 port on your system.
3 Wait until the status light on the battery turns green before removing it from the port.
Recharging the battery can take from 20 minutes up to multiple hours.
4 Insert the charged battery into the remote control.
Figure 1. Recharge the Battery: RealPresence Group 300, 310, 500 and 700 Systems
Printed from Polycom, Inc. (http://documents.polycom.com)
Parts of the Remote Control
Page 12