Polycom RealPresence Group Series Documentation page 45

Related Topics
Audio Adjustments
Unmute the Microphone
You can resume your microphone audio after muting it in order to speak in a call.
Procedure
•
If muted, press
Related Topics
Audio Adjustments
Connecting a USB Headset
You can connect one wired USB headset or wireless Bluetooth headset with a USB adapter to
RealPresence Group Series system. When connected, the headset is used as the primary audio input
and output device for the system, and the headset functions automatically without any additional setup.
After your headset is connected, you can hear and control call audio on your headset while the
headset is connected to the system. However, you cannot use the USB headset audio controls to mute
or change the volume on the system. If you adjust the volume or mute your microphone on your
headset, it does not adjust the volume or mute the microphone on the system.
For more information on supported USB Headsets, refer to RealPresence Group Series Release Notes
at Polycom Support.
Related Topics
Audio Adjustments
Connect a Wired USB Headset
After you verify that your headset hardware and software is supported, you can connect your wired
headset to the system.
Procedure
•
Insert the headset USB cable into an available USB port on the system.
Printed from Polycom, Inc. (http://documents.polycom.com)
on the remote control or on the table microphone.
Page 45