Polycom RealPresence Group Series Documentation page 54

Hide thumbs Also See for RealPresence Group Series:

Table of Contents

When enabled by your system administrator, a visual security classification indicator displays during a

call to help participants be aware of the maximum level of classified information they can safely

exchange in a conversation. After a call begins, the visual security classification indication of the call

displays on all endpoint monitors in the call. During a call, you can override the security classification

and assign a lower security classification level. While you can change the security level, you cannot

raise it higher than the default setting.

Procedure

1 In the local interface, navigate to Call > Security.

2 From the Security Classification list, select the desired security level.

3 Click Continue to confirm your selection. After the security classification is raised or lowered, a

message displays for five seconds to all video participants. The change is only applicable to the

current call.