Polycom RealPresence Group Series Documentation page 42

Note
The default setting is to not allow video display on the web. Be sure to verify whether
your system administrator wants the setting to be changed.
Procedure
1 Navigate to
2 Select Allow Video Display on Web.
Related Topics
Video Adjustments
Multipoint Viewing Modes
The multipoint viewing mode set on the host conference system is the layout used in a conference call
for all endpoints connected to the call. The modes alternate between full screen, continuous presence,
which is where video images from multiple sites are automatically combined on one monitor, or a
combination of both.
The default mode is Discussion, however, your administrator may have set any of the following modes
as the default for your system:
•
Auto - The view switches between continuous presence and full screen, depending on the
interaction between the sites. If multiple sites are talking at the same time, continuous presence
is used. If one site speaks uninterrupted for at least 15 seconds, that site appears in full screen
on the monitor.
•
Discussion - Multiple sites are displayed in continuous presence. The current speaker's image
is highlighted.
•
Presentation - The speaker sees continuous presence while the other sites see the speaker in
full screen on the monitor.
•
Full screen - The site that is speaking is shown in full screen to all other sites. The current
speaker sees the previous speaker.
Related Topics
Video Adjustments
Set the Multipoint Viewing Mode
You can change your multipoint viewing mode from the default mode.
Procedure
1 From the Home screen, press
Printed from Polycom, Inc. (http://documents.polycom.com)
Settings > User Settings > Meetings.
.
Page 42