Polycom RealPresence Group Series Documentation page 47

Adjust Cameras
You can make adjustments to Polycom cameras to enhance the view of meeting participants.
You can adjust the view of meeting participants using the remote control with Polycom EagleEye III,
EagleEye IV, EagleEye Acoustic, EagleEye Director or EagleEye Director II cameras and camera
systems.
Note Before you can adjust the EagleEye Director or EagleEye Director II camera systems,
you must turn camera tracking off.
Procedure
1 Select either a near-end or far-end video source to control.
During a multipoint call hosted by another system in the call, you can adjust a camera only at
the far end that has a current speaker.
2 Press the navigation buttons on the remote control to move the camera up, down, left, or right.
3 On the remote control, press
Related Topics
Cameras
Switch Between Cameras
You can switch to controlling the far-end camera or the near-end camera in a call.
Procedure
1 Press .
2 Select Camera, then select
Related Topics
Cameras
Allow the Far-End System to Control Your Camera
If your system administrator has allowed access to user settings, you can let the far-end system control
your camera.
If their systems support presets, far-end participants can also set and use presets for your camera.
Note Changing this setting takes effect immediately, even if a call is in progress.
Printed from Polycom, Inc. (http://documents.polycom.com)
to zoom out or to zoom in.
Near Camera or Far Camera.
Page 47