Port Settings; Captive Portal - peplink Pepwave MAX Series User Manual

Enable
DHCP Server IP
Address
DHCP Option 82
Once DHCP is set up, configure LAN Physical Settings, Static Route Settings, WINS Server
Settings, and DNS Proxy Settings as noted above.

Port Settings

8.2
To configure port settings, navigate to Network > Port Settings
On this screen, you can enable specific ports, as well as determine the speed of the LAN ports,
whether each port is a trunk or access port, can well as which VLAN each link belongs to, if any.

Captive Portal

8.3
The captive portal serves as a gateway that clients have to pass if they wish to access the
internet using your router. To configure, navigate to Network>LAN>Captive Portal.
https://www.peplink.com
Check this box to turn on DHCP relay. Click the
Enter the IP addresses of one or two DHCP servers in the provided fields. The
DHCP servers entered here will receive relayed DHCP requests from the LAN. For
active-passive DHCP server configurations, enter active and passive DHCP server
relay IP addresses in DHCP Server 1 and DHCP Server 2.
DHCP Option 82 includes device information as relay agent for the attached client
when forwarding DHCP requests from client to server. This option also embeds the
device's MAC address and network name in circuit and remote IDs. Check this box
to enable DHCP Option 82.
icon to disable DHCP relay.
95 Copyright @ 2020 Pepwave