L2Tp With Ipsec; Openvpn - peplink Pepwave MAX Series User Manual

22.1 L2TP with IPsec

Pre-shared Key
Listen On
Disable Weak
Ciphers
Continue to configure the authentication method.

22.2 OpenVPN

Select OpenVPN and continue to configure the authentication method.
The OpenVPN Client profile can be downloaded from the Status > device page after the
configuration has been saved.
You have a choice between 2 different OpenVPN Client profiles.
● "route
Using this profile, VPN clients will send all the traffic through the OpenVPN tunnel
● "split
Using this profile, VPN clients will ONLY send those traffic designated to the
untagged LAN and VLAN segment through the OpenVPN tunnel.
https://www.peplink.com
L2TP with IPsec Remote User Access Settings
Enter your pre shared key in the text field. Please note that remote devices will need
this preshared key to access the Balance.
This setting is for specifying the WAN IP addresses that allow remote user access.
Click the button to show and enable this option.
When checked, weak ciphers such as 3DES will be disabled.
all traffic"
tunnel"
179
profile
profile
Copyright @ 2020 Pepwave