Gpio Menu - peplink Pepwave MAX Series User Manual

GPIO Menu

The Ignition Sensing options are available in Advanced > GPIO
The configurable option for Ignition Input is Delay; the time in seconds the router stays
powered on after the ignition is turned off.
Still under development:
O/P (connected to I/O pin on 4 pin connector) can be configured as a digital input, digital output
or analog input.
Digital Input - the connection supports input sensing; it reads the external input and determine
if the settings should be 'High' (on) or 'Low' (off).
Digital Output - when there is a healthy WAN connection, the output pin is marked as 'High'
(on). Otherwise, it will be marked as 'Low' (off).
Analog Input - to be confirmed. In most cases should read the external input and determine the
voltage level.
https://www.peplink.com 195 Copyright @ 2020 Pepwave