Ap Controller; Qos; Other Supported Features - peplink Pepwave MAX Series User Manual

service
●
Traffic prioritization and DSL optimization
●
Prioritize and route traffic to VPN tunnels with Priority and Enforced algorithms

1.1.7 AP Controller

●
Configure and manage Pepwave AP devices
●
Review the status of connected APs

1.1.8 QoS

●
Quality of service for different applications and custom protocols
●
User group classification for different service levels
●
Bandwidth usage control and monitoring on group- and user-level
●
Application prioritization for custom protocols and DSL/cable optimization

Other Supported Features

1.2
●
User-friendly web-based administration interface
●
HTTP and HTTPS support for web admin interface (default redirection to HTTPS)
●
Configurable web administration port and administrator password
●
Firmware upgrades, configuration backups, ping, and traceroute via web admin
interface
●
Remote web-based configuration (via WAN and LAN interfaces)
●
Time server synchronization
●
SNMP
●
Email notification
●
Read-only user for web admin
●
Shared IP drop-in mode
●
Authentication and accounting by RADIUS server for web admin
●
Built-in WINS servers*
●
Syslog
●
SIP passthrough
●
PPTP packet passthrough
●
Event log
●
Active sessions
●
Client list
●
WINS client list *
●
UPnP / NAT-PMP
●
Real-time, hourly, daily, and monthly bandwidth usage reports and charts
https://www.peplink.com 11 Copyright @ 2020 Pepwave