Snmp - peplink Pepwave MAX Series User Manual

Remote Syslog
Remote Syslog
Host
Push Events

28.7 SNMP

SNMP or simple network management protocol is an open standard that can be used to collect
information about the Pepwave router. SNMP configuration is located at System>SNMP.
SNMP Device
Name
SNMP Port
https://www.peplink.com
Event Log Settings
This setting specifies whether or not to log events at the specified remote syslog
server.
This setting specifies the IP address or hostname of the remote syslog server.
The Pepwave router can also send push notifications to mobile devices that have
our Mobile Router Utility installed. Check the box to activate this feature.
For more information on the Router Utility, go to: www.peplink.com/products/router-
utility
SNMP Settings
This field shows the router name defined at System>Admin Security.
This option specifies the port which SNMP will use. The default port is 161.
230 Copyright @ 2020 Pepwave