Algorithm: Priority; Algorithm: Overflow - peplink Pepwave MAX Series User Manual

Matching traffic will be routed through the specified WAN connection, regardless of the health
check status of the WAN connection. Starting from Firmware 5.2, outbound traffic can be
TM
enforced to go through a specified SpeedFusion connection.

15.2.4 Algorithm: Priority

This setting specifies the priority of the WAN connections used to route the specified network
service. The highest priority WAN connection available will always be used for routing the
specified type of traffic. A lower priority WAN connection will be used only when all higher priority
connections have become unavailable.
TM
Starting from Firmware 5.2, outbound traffic can be prioritized to go through SpeedFusion
connection(s). By default, VPN connections are not included in the priority list.
Tip
Configure multiple distribution rules to accommodate different kinds of services.

15.2.5 Algorithm: Overflow

The traffic matching this rule will be routed through the healthy WAN connection that has the
highest priority and is not in full load. When this connection gets saturated, new sessions will
be routed to the next healthy WAN connection that is not in full load.
https://www.peplink.com 156 Copyright @ 2020 Pepwave