Reboot; Tools; Ping - peplink Pepwave MAX Series User Manual

28.11 Reboot

This page provides a reboot button for restarting the system. For maximum reliability, the
Pepwave router can equip with two copies of firmware. Each copy can be a different version.
You can select the firmware version you would like to reboot the device with. The firmware
marked with (Running) is the current system boot up firmware.
Please note that a firmware upgrade will always replace the inactive firmware partition.
29

Tools

29.1 Ping

TM
The ping test tool sends pings through a specific Ethernet interface or a SpeedFusion VPN
connection. You can specify the number of pings in the field Number of times, to a maximum
number of 10 times. Packet Size can be set to a maximum of 1472 bytes. The ping utility is
located at System>Tools>Ping, illustrated below:
https://www.peplink.com 234 Copyright @ 2020 Pepwave