Advanced Wi-Fi Settings - peplink Pepwave MAX Series User Manual

23 days, even if a WAN's IP address has not changed.

10 Advanced Wi-Fi Settings

Wi-Fi settings can be configured at Advanced>Wi-Fi Settings (or AP>Settings on some
models). Note that menus displayed can vary by model.
SSID
Operating
Country
Preferred
Frequency
Per FCC regulation, the country selection is not available on all models marketed in the US. All
US models are fixed to US channels only.
https://www.peplink.com
AP Settings
You can select the wireless networks for 2.4 GHz or 5 GHz separately for each
SSID.
This drop-down menu specifies the national/regional regulations which the Wi-
Fi radio should follow.
●
If a North American region is selected, RF channels 1 to 11 will be
available and the maximum transmission power will be 26 dBm (400
mW).
●
If European region is selected, RF channels 1 to 13 will be available.
The maximum transmission power will be 20 dBm (100 mW).
NOTE: Users are required to choose an option suitable to local laws and
regulations.
Indicate the preferred frequency to use for clients to connect.
Important Note
124 Copyright @ 2020 Pepwave