Algorithm: Least Used; Algorithm: Lowest Latency - peplink Pepwave MAX Series User Manual

Drag and drop to specify the order of WAN connections to be used for routing traffic. Only the
highest priority healthy connection that is not in full load will be used.

15.2.6 Algorithm: Least Used

The traffic matching this rule will be routed through the healthy WAN connection that is selected
in Connection and has the most available download bandwidth. The available download
bandwidth of a WAN connection is calculated from the total download bandwidth specified on
the WAN settings page and the current download usage. The available bandwidth and WAN
selection is determined every time an IP session is made.

15.2.7 Algorithm: Lowest Latency

The traffic matching this rule will be routed through the healthy WAN connection that is selected
in Connection and has the lowest latency. Latency checking packets are issued periodically to
a nearby router of each WAN connection to determine its latency value. The latency of a WAN
is the packet round trip time of the WAN connection. Additional network usage may be incurred
as a result.
Tip
https://www.peplink.com 157 Copyright @ 2020 Pepwave