Expert Mode; Inbound Access; Port Forwarding Service - peplink Pepwave MAX Series User Manual

The roundtrip time of a 6M down/640k uplink can be higher than that of a 2M down/2M up link because
the overall round trip time is lengthened by its slower upload bandwidth, despite its higher downlink speed.
Therefore, this algorithm is good for two scenarios:
●
All WAN connections are symmetric; or
●
A latency sensitive application must be routed through the lowest latency WAN, regardless of the
WAN's available bandwidth.

15.2.8 Expert Mode

Expert Mode is available on some Pepwave routers for use by advanced users.
To enable the feature, click on the help icon and click turn on Expert Mode.
In Expert Mode, a new special rule, SpeedFusion
Custom Rules table. This rule represents all SpeedFusion
from remote VPN peers. By default, this bar is on the top of all custom
rules. This position means that traffic for remote VPN subnets will be routed to
the corresponding VPN peer. You can create custom Priority or Enforced
rules and move them
above the bar to override the SpeedFusion
Upon disabling Expert Mode, all rules above the bar will be removed.

16 Inbound Access

16.1 Port Forwarding Service

Pepwave routers can act as a firewall that blocks, by default, all inbound access from the
Internet. By using port forwarding, Internet users can access servers behind the Pepwave
router. Inbound port forwarding rules can be defined at Advanced>Port Forwarding.
https://www.peplink.com
TM
Routes, is displayed in the
TM
routes learned
TM
routes.
158 Copyright @ 2020 Pepwave