Bgp - peplink Pepwave MAX Series User Manual

21

BGP

Click the Advanced tab from the top bar, and then click the Routing Protocols>BGP item on
the sidebar to configure BGP.
Click "x" to delete a BGP profile
Click "Add" to add a new BGP profile
Name
Enable
Interface
Autonomous
System
Neighbor
IP address
Autonomous
System
Multihop/TTL
https://www.peplink.com
This field is for specifying a name to represent this profile.
When this box is
Otherwise, it will be disabled.
The interface where BGP neighbor is located
The Autonomous System Number (ASN) of this profile
BGP Neighbor's details
Neighbor's IP address
Neighbor's ASN
Time-to-live (TTL)
Leave it blank if BGP neighbor is directly connected, otherwise you must specify a
TTL value. Accurately, this option should be used if the configured neighbor IP
BGP
checked, this BGP
of
176
profile will be enabled.
BGP packet.
Copyright @ 2020 Pepwave