Client List - peplink Pepwave MAX Series User Manual

This screen displays the number of sessions initiated by each application. Click on each service
listing for additional information. This screen also indicates the number of sessions initiated by
each WAN port. In addition, you can see which clients are initiating the most sessions.
You can also perform a filtered search for specific sessions. You can filter by subnet, port,
protocol, and interface. To perform a search, navigate to Status>Active Sessions>Search.
This Active Sessions section displays the active inbound/outbound sessions of each WAN
connection on the Pepwave router. A filter is available to sort active session information. Enter
a keyword in the field or check one of the WAN connection boxes for filtering.

30.4 Client List

The client list table is located at Status>Client List. It lists DHCP and online client IP addresses,
names (retrieved from the DHCP reservation table or defined by users), current download and
upload rate, and MAC address.
Clients can be imported into the DHCP reservation table by clicking the button on the right.
You can update the record after import by going to Network>LAN.
https://www.peplink.com 241 Copyright @ 2020 Pepwave