Incontrol; Configuration - peplink Pepwave MAX Series User Manual

Privacy Protocol

28.8 InControl

InControl is a cloud-based service which allows you to manage all of your Peplink and Pepwave
devices with one unified system. With it, you can generate reports, gather statistics, and
configure your devices automatically. All of this is now possible with InControl.
When this check box is checked, the device's status information will be sent to the Peplink
InControl system. This device's usage data and configuration will be sent to the system if you
enable the features in the system.
Alternately, you could also privately host InControl. Simply check the box beside the "Privately
Host InControl" open, and enter the IP Address of your InControl Host.
You can sign up for an InControl account at https://incontrol2.peplink.com/. You can register
your devices under the account, monitor their status, see their usage reports, and receive offline
notifications.

28.9 Configuration

Backing up Pepwave router settings immediately after successful completion of initial setup is
strongly recommended. The functionality to download and upload Pepwave router settings is
found at System>Configuration. Note that available options vary by model.
https://www.peplink.com
●
NONE
●
MD5
●
SHA
When MD5 or SHA is selected, an entry field will appear for the password.
This setting specifies via a drop-down menu one of the following valid privacy
protocols:
●
NONE
●
DES
When DES is selected, an entry field will appear for the password.
232 Copyright @ 2020 Pepwave