Gps Forwarding; Ignition Sensing - peplink Pepwave MAX Series User Manual

23.6 GPS Forwarding

Using the GPS forwarding feature, some Pepwave routers can automatically send GPS reports
to a specified server. To set up GPS forwarding, navigate to Advanced>GPS Forwarding.
Enable
Server
GPS Report Format
NMEA Sentence
Type
Vehicle ID
TAIP Sentence
Type/TAIP ID
(optional)

23.7 Ignition Sensing

Ignition Sensing detects the ignition signal status of a vehicle it is installed in.
This feature allows the cellular router to start up or shut down when the engine of that vehicle
is
https://www.peplink.com
GPS Forwarding
Check this box to turn on GPS forwarding.
Enter the name/IP address of the server that will receive GPS data. Also specify
a port number, protocol (UDP or TCP), and a report interval of between 1 and 10
seconds. Click to save these settings.
Choose from NMEA or TAIP format for sending GPS reports.
If you've chosen to send GPS reports in NMEA format, select one or more
sentence types for sending the data (GPRMC, GPGGA, GPVTG, GPGSA, and
GPGSV).
The vehicle ID will be appended in the last field of the NMEA sentence. Note that
the NMEA sentence will become customized and non-standard.
If you've chosen to send GPS reports in TAIP format, select one or more
sentence types for sending the data (PV—Position / Velocity Solution and
CP—Compact Velocity Solution). You can also optionally include an ID number
in the TAIP ID field.
started or turned
192
off.
Copyright @ 2020 Pepwave