The Incontrol Method - peplink Pepwave MAX Series User Manual

All of the Peplink/Pepwave GA firmware can be found here Navigate to the relevant product line
(ie. Balance, Max, FusionHub, SOHO, etc). Some product lines may have a dropdown that lists
all of the products in that product line. Here is a screenshot from the Balance line.
If the device has more than one firmware version the current hardware revision will be required
to know what firmware to download.
Navigate to System > Firmware and click the Choose File button under the Manual Firmware
Upgrade section. Navigate to the location that the firmware was downloaded to select the ".img"
file and click the Open button.
Click on the Manual Upgrade button to start the upgrade process.
A prompt will be displayed advising to download the Current Active Configuration. Please click
on the underlined download text. After downloading the current config click the Ok button to
start the upgrade process. The firmware will now be applied to the router*. The amount of time
it takes for the firmware to upgrade will depend on the router that's being upgraded.
*Upgrading the firmware will cause the router to reboot.

28.2.3 The InControl method

Described in this knowledgebase article on our forum.
https://www.peplink.com 225 Copyright @ 2020 Pepwave