Pppoe Connection - peplink Pepwave MAX Series User Manual

9.1.3 PPPoE Connection

This connection method is suitable if your ISP provides a login ID/password to connect via
PPPoE.
Routing Mode
IP Address /
Subnet Mask /
Default Gateway
PPPoE Username /
Password
Confirm PPPoE
Password
Service Name
(Optional)
IP Address
(Optional)
https://www.peplink.com
PPPoE Settings
NAT allows substituting the real address in a packet with a mapped address
that is routable on the destination network. By clicking the help icon in this field,
you can display the IP Forwarding option, if your network requires it.
This information is obtained from the ISP automatically.
Enter the required information in these fields in order to connect via PPPoE to
the ISP. The parameter values are determined by and can be obtained from
the ISP.
Verify your password by entering it again in this field.
Service name is provided by the ISP.
Note: Leave this field blank unless it is provided by your ISP.
If your ISP provides a PPPoE IP address, enter it here.
Note: Leave this field blank unless it is provided by your ISP.
104 Copyright @ 2020 Pepwave