Cellular Wan - peplink Pepwave MAX Series User Manual

L2TP Username /
Password
Confirm L2TP
Password
Server IP
Address / Host
Address Type
DNS Servers

Cellular WAN

9.2
To access cellular WAN settings, click Network>WAN>Details.
https://www.peplink.com
L2TP Settings
Enter the required information in these fields in order to connect via L2TP to your
ISP.
The parameter values are determined by and can be obtained from your ISP.
Verify your password by entering it again in this field.
L2TP server address is a parameter which is provided by your ISP.
Note: Leave this field blank unless it is provided by your ISP.
Your ISP will also indicate whether the server IP address is Dynamic or Static.
Please click the appropriate value.
Each ISP may provide a set of DNS servers for DNS lookups. This setting
specifies the DNS (Domain Name System) servers to be used when a DNS
lookup is routed through this connection.
Selecting Obtain DNS server address automatically results in the DNS
servers assigned by the PPPoE server to be used for outbound DNS lookups
over the WAN connection.
(The DNS servers are obtained along with the WAN IP address assigned from
the PPPoE server.)
When Use the following DNS server address(es) is selected, you can enter
custom DNS server addresses for this WAN connection into the DNS server 1
and DNS server 2 fields.
106 Copyright @ 2020 Pepwave