Nat Mappings - peplink Pepwave MAX Series User Manual

When a computer creates a rule using these protocols, the specified TCP/UDP port of all WAN
connections' default IP address will be forwarded.
Check the corresponding box(es) to enable UPnP and/or NAT-PMP. Enable these features only
if you trust the computers connected to the LAN ports.
When the options are enabled, a table listing all the forwarded ports under these two protocols
can be found at Status>UPnP / NAT-PMP.
17

NAT Mappings

NAT mappings allow IP address mapping of all inbound and outbound NAT'd traffic to and from
an internal client IP address. Settings to configure NAT mappings are located at
Advanced>NAT Mappings.
To add a rule for NAT mappings, click Add NAT Rule.
NAT Mapping Settings
LAN NAT mapping rules can be defined for a single LAN IP Address, an IP Range, or
https://www.peplink.com 161 Copyright @ 2020 Pepwave