Algorithm: Enforced - peplink Pepwave MAX Series User Manual

Also, the Internet IP depends on the WAN connections over which communication actually takes
place. As a result, a LAN client computer behind the Pepwave router may communicate using
multiple Internet IP addresses. For example, a LAN client computer behind a Pepwave router
with three WAN connections may communicate on the Internet using three different IP
addresses.
With the persistence feature, rules can be configured to enable client computers to persistently
utilize the same WAN connections for e-banking and other secure websites. As a result, a client
computer will communicate using one IP address, eliminating the issues mentioned above.
There are two persistent modes: By Source and By Destination.
By Source:
By Destination:
The default mode is By Source. When there are multiple client requests, they can be distributed
(persistently) to WAN connections with a weight. If you choose Auto in Load Distribution, the
weights will be automatically adjusted according to each WAN's Downstream Bandwidth
which is specified in the WAN settings page). If you choose Custom, you can customize the
weight of each WAN manually by using the sliders.

15.2.3 Algorithm: Enforced

This setting specifies the WAN connection usage to be applied on the specified IP protocol and
port. This setting is applicable only when Algorithm is set to Enforced.
https://www.peplink.com
The same WAN connection will be used for traffic matching the rule and
originating from the same machine, regardless of its destination. This option will
provide the highest level of application compatibility.
The same WAN connection will be used for traffic matching the rule, originating
from the same machine, and going to the same destination. This option can
better distribute loads to WAN connections when there are only a few client
machines.
155 Copyright @ 2020 Pepwave