Mediafast Configuration - peplink Pepwave MAX Series User Manual

The setting is same as Website type and you can refer to the description in the above section
For the Application type, you need to pack your application as below:
1. Implement two bash script files, start.sh and stop.sh in root folder, to start and stop your
application. the Mediafast router will only execute start.sh and stop.sh when the
corresponding website is enabled and disabled respectively.
2. Compress your application files and the bash script to .tar.gz format.
3. Upload this tar file to the router.
12

MediaFast Configuration

MediaFast settings can be configured from the Advanced menu.
https://www.peplink.com 133 Copyright @ 2020 Pepwave