Settings - peplink Pepwave MAX Series User Manual

25.2 Settings

On many Pepwave models, the AP settings screen (AP>Settings) looks similar to the example
below:
SSID
Operating Country
https://www.peplink.com
AP Settings
These buttons specify which wireless networks will use this AP profile. You can
also select the frequencies at which each network will transmit. Please note that
the Peplink Balance does not detect whether the AP is capable of transmitting at
both frequencies. Instructions to transmit at unsupported frequencies will be
ignored by the AP.
This drop-down menu specifies the national / regional regulations which the AP
205 Copyright @ 2020 Pepwave