5.3.2.15 Alarm panel
The alarm panel shown below, provides the EntelliPro ES status and the capability to reset faults, warnings and device errors.
To view fault, warning, and device error details click on Details. To reset a particular fault, the fault type must be
selected then click Reset.
5.3.3
Debug panel
Th
e debug panel provides a means to fully test the custom logic. It shows the actual state of the EntelliPro ES
logic variables. The data is only valid when the parameter "debug mode" is activated in the
parameterization/function panel window.
NOTE:
The debug mode should be activated only for test purposes.
The value of the variable is displayed in colour with the following meaning:
Red:
variable is TRUE.
Black:
variable is FALSE.
Grey:
status unknown (check communication)
Refer to Figure 5-18 for the WinESG debug panel.
Figure 5-18: WinESG parameterization debug panel
EP OS MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL
CHAPTER 5: Wi nE S G
5.28