Removing The Module From The Din Rail; Panel Mounting - GE PAC8000 series User Manual

Contents
Step 3: Guide the module into the connectors and lock them with two plastic screws with 4.5 N-m

Removing the Module from the DIN Rail

2.5
1. Remove the screws of PNS and pull the module from the carrier.
2. Unlock four screws with a small flathead screw driver, shown in step 2 of installation
3. Slide the module along the DIN rail away from the other modules until the connector

Panel Mounting

2.6
For applications requiring maximum resistance to mechanical vibration and shock, the PNS
must also be panel-mounted.
Tolerances on all dimensions are ±0.13mm (0.005 in) non-cumulative.
1.1–1.4Nm (10–12 in/lbs) of torque should be applied to M3.5 (#6-32) steel screw threaded
into material containing internal threads and having a minimum thickness of 2.4mm (.093in).
24
instruction.
disengages
PAC8000* IO PROFINET Scanner User's Manual–September 2017
GFK-2839B