Winesg Configuration - GE EntelliPro ES Series Installation And Instruction Manual

CHAPTER 5: WinESG

5.1.1 WinESG Configuration

To configure WinESG, select the file menu, click configuration, and then click WinESG.
English, German, French, Spanish, Italian, Portuguese and Russian, languages; and automatic parameterization, off, 1
trial, 2 trials, 3 trials, 4 trials and 5 trials, can be selected.
Automatic parameterization activates or deactivates the automatic parameterization function for connected field devices.
This function tries to overwrite the parameters in the field devices with the parameters out of WinESG
database when they are different. You can select how often WinESG should try, when the field device does not accept
the new parameters. The selectable values are off to 5 trials.
A green "A" in the main window shows that automatically parameterization is switched on.
CAUTION : Automatic parameterization overwrites settings in the field devices. Make sure that your database contains
the right settings. If you add new devices to the busline, they will be parameterized.
CAUTION
If you change the database automatic parameterization will be switched off. You have to switch on manually again.
Figure 5-1 shows the WinESG configuration panel.
Figure 5.1: WinESG configuration panel
5.5
MOTOR MANAGEMENT T SY STEM – INSTRUCTION MANUAL