Metering And Monitoring Specifications; Input Specification - GE EntelliPro ES Series Installation And Instruction Manual

Motor controller
Table of Contents

Advertisement

CHAPTER 1: INTR ODUCTION
 
Thermistor
Sensor types: ..........................................................................PTC (RHOT = 3.6 kΩ, RRESET = 1.5 kΩ)
Time delay................................................................................500ms
Elements ...................................................................................fault (trip) and warning (alarm) - warning not valid for ATEX
Connection ..............................................................................1, 3 or 6 thermistors in series
Standard
.................................................................................IEC 34-11-12
Max cable length to detect short ..................................AWG 14 = 266m
 

1.2.2 Metering and monitoring specifications

 
Event Recorder
 
Capacity....................................................................................250 events
 
Data storage...........................................................................non-volatile memory
 
Phase Metering
 
Accuracy...................................................................................±5% with external CT
Elements ...................................................................................single phase, average
 
 

1.2.3 Input specification

 
Digital Inputs
 
Fixed pickup ............................................................................16.8Vdc (24Vdc version)
 
Fixed drop-off .........................................................................10Vdc (24Vdc version)
 
CA UTION:
The usage of voltage between the drop-off and pickup range is not recommended.
 
 
...................................................................40 msec
Recognition time
 
Current draw at rated voltage ........................................5ma on 24Vdc (24Vdc version)
Type ............................................................................................opto-isolated inputs
Maximum input voltage.....................................................28.8Vdc (24Vdc version)
 
1.10
 
AWG 16 = 160m AWG 20 = 70m
77Vac (110/240Vac version)
30Vac (110/240Vac version)
7ma on 240Vac (120/240Vac version)
275Vac (120/240Vac version)
EP OS MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL

Advertisement

Table of Contents
loading

This manual is also suitable for:

Entellipro es3 dp 2 0Entellipro es3 dp 3 0Entellipro es5 dp 2 2Entellipro es5 dp 2 3Entellipro es5 dp 3 3

Table of Contents