CHAPTER 6: ENTELLIPRO CP3 and CP5 APPLICATION
6.7 EntelliPro CP5 device addresses
The device setting menu, shown in the figure below, can be accessed by pressing function key "F5" from root menu.
For each device in the system, a unique a Modbus RTU address must be assigned. No two devices can have the
same address.
The "Device configuration" setting is protected with a user level password "22222222".
The Modbus RTU address range is 1 to 247. All addresses are stored permanently in the CP5 panel. These addresses
are used when EntelliPro CP5 starts.
6.14
EPOS MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL