CHAPTER 4: COMMUNICATION
Profibus-DP communication is not running and no data change is possible.
The Profibus-DP line is green, all parameters and configuration is ok. The cyclic Profibus-DP communication is running
and the configured data change is possible
To see the current status of the EntelliPro ES device, click on the device. The correspondence diagnostic window opens
showing an overview of the cyclic Profibus-DP communication. Data such as status information, assigned PB-C1 master and
Profibus-DP Ident Number are shown per the figure below.
4.57
EPOS MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL