Table 6-3 Edit Ipx Static Route Menu Fields - ZyXEL Communications Prestige 642R Series User Manual

The following table contains the instructions on how to configure the Edit IPX Static Route menu.
FIELD
This is the index number of the route as listed in Menu 12.2 – IPX Static Route
Route #
Setup.
In this field, enter the name of the server. This must be the exact name configured in
Server Name
the NetWare server.
Active This field allows you to activate/deactivate this static route.
Network # This field contains the internal network number of the remote server that you wish to
access. [00000000] and [FFFFFFFF] are reserved.
Node # This field contains the address of the node on which the server resides. If you are
using a Novell IPX implementation, this value is [000000000001].
Socket # This field contains the socket number on which the server will receive service
requests. The default for this field is hex [0451].
Type # This field identifies the type of service the server provides. The default for this field is
hex [0004].
Hop Count This field indicates the number of intermediate networks that must be passed through
to reach the remote node.
Tick Count This field indicates the time-ticks required to reach the remote node.
Gateway Node In this field, enter the number of the remote node that is the gateway for this static
route.
Once you have completed filling in the menu, press [Enter] at the message [Press ENTER to Confirm...]
to save your configuration, or press [Esc] to cancel.
IPX Configuration
Table 6-3 Edit IPX Static Route Menu Fields
Prestige 642R Series ADSL Router
DESCRIPTION
6-9