Command Interpreter Mode; Boot Module Commands - ZyXEL Communications Prestige 642R Series User Manual

10.10 Command Interpreter Mode

This option allows you to enter the command interpreter mode. A list of valid commands can be found by
typing [help] at the command prompt. For more detailed information, check the ZyXEL Web site or send e-
mail to the ZyXEL Support Group.
Copyright (c) 1994 - 1999 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys
wan
ipx

10.11 Boot module commands

Prestige boot module commands with accompanying explanations are shown in the following table. For
ATBAx, x denotes the number preceding the colon to give the console port speed following the colon in the
list of numbers that follows; e.g. ATBA3 will give a console port speed of 9.6 Kbps. ATSE displays the
seed that is used to generate a password to turn on the debug flag in the firmware. The ATSH command
shows product-related information such as boot module version, vendor name, product model, RAS code
revision, etc.
System Maintenance
Enter Menu Selection Number: 8
exit device
ip ppp
hdap
Figure 10-22
Prestige 642R Series ADSL Router
ether
bridge
Command mode
10-19