ZyXEL Communications Prestige 642R Series User Manual page 106

Prestige 642R Series ADSL Router
Field
Destination: Port #
Comp
Source: IP Address
Source: IP Mask
Source: Port #
Source: Port #
Comp
TCP Estab
More
Log
Action Matched
Action Not Matched
8-10
Select the comparison to apply to the destination port in
the packet against the value given in Destination: Port #.
Enter the source IP Address of the packet you wish to
filter. This field is disregarded if it is 0.0.0.0.
Enter the IP mask to apply to the Source: IP Addr.
Enter the source port of the packets that you wish to filter.
The range of this field is 0 to 65535. This field is
disregarded if it is 0.
Select the comparison to apply to the source port in the
packet against the value given in Source: Port #.
This field is applicable only when IP Protocol field is 6,
TCP. If yes, the rule matches only established TCP
connections; else the rule matches all TCP packets.
If yes, a matching packet is passed to the next filter rule
before an action is taken; else the packet is disposed of
according to the action fields.
If More is Yes, then Action Matched and Action Not
Matched will be N/A.
Select the logging option from the following:
None – No packets will be logged.
Action Matched – Only packets that match the rule
parameters will be logged.
Action Not Matched - Only packets that do not
match the rule parameters will be logged.
Both – All packets will be logged.
Select the action for a matching packet.
Select the action for a packet not matching the rule.
Description Option
None/Less/Greater
/Equal/Not Equal]
IP Address
IP Mask
0-65535
None/Less/Greater
/Equal/Not Equal
Yes/No
Yes / No
None
Action Matched
Action Not
Matched
Both
Check Next Rule
Forward
Drop
Check Next Rule
Forward
Drop
Filter Configuration