Table of Contents
Advertisement
The following table describes the Edit Bridge Static Route Menu.
FIELD
Route #
This is the index number of the route as listed in Menu 12.3-Bridge Static Route
Setup.
Route Name
Enter a name for the bridge static route for identification purposes.
Active
Indicates whether the static route is active or not.
Ether Address
Enter the MAC address of the destination machine that you wish to bridge the
packets to.
IP Address
If available, enter the IP address of the destination machine that you wish to bridge
the packets to.
Gateway Node
Enter the number of the remote node that is the gateway of this static route.
Once you have completed filling in this menu, press [Enter] at the message [Press ENTER to Confirm...]
to save your configuration, or press [Esc] to cancel.
Bridging Setup
Table 7-3
Edit Bridge Static Route Menu Fields
Prestige 642R Series ADSL Router
DESCRIPTION
7-5
Advertisement
Table of Contents
Troubleshooting
