Prestige 642R Series ADSL Router
Step 2.
Connect a cable from the double jack end of the Y-Connector to the "wall side" of the
microfilter.
Step 3.
Connect another cable from the double jack end of the Y-Connector to the Prestige.
Step 4.
Connect the "phone side" of the microfilter to your telephone as shown in the following figure.
2.6
Special Note for P642 ISDN Users
Please note that section 2.4 "Connecting a POTS Splitter" and sections 2.5 "Telephone Microfilters" of
the P642 User's Guide do not apply for P642 ISDN users.
2-4
Wall
Y -CONNECTOR
Jack
Figure 2-4
Prestige
Microfilter
Wall
Side
Connecting a Microfilter
Phone
Side
Hardware Installation & Setup