System Status; Figure 10-2 Menu 24.1 - System Maintenance - Status - ZyXEL Communications Prestige 642R Series User Manual

Prestige 642R Series ADSL Router

10.1 System Status

The first selection, System Status, gives you information on the status and statistics of the ports, as shown
below. System Status is a tool that can be used to monitor your Prestige. Specifically, it gives you
information on your ADSL line status, number of packets sent and received.
To get to the System Status, enter number 24 from the Main Menu to go to Menu 24 - System
Maintenance. From this menu, select number 1, System Status. There are two commands in Menu 24.1
- System Maintenance - Status. Entering 1 resets the counters and [ESC] takes you back to the previous
screen.
The table below describes the fields present in Menu 24.1 - System Maintenance - Status. It should be
noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes.
Note: Displaying this screen degrades system performance.
Node-Lnk Status
1-1483 Up
2 N/A
3 N/A
4 N/A
5 N/A
6 N/A
7 N/A
8 N/A
Ethernet:
Status: 100M/Full Duplex
Collisions: 0
CPU Load = 4.25%
Figure 10-2
The following table describes the fields present in Menu 24.1 - System Maintenance – Status:
10-2
Menu 24.1 -- System Maintenance – Status
TxPkts RxPkts
1462 1567
0 0
0 0
0 0
0 0
0 0
0 0
0 0
Tx Pkts: 1583
Rx Pkts: 1521
Press Command:
COMMANDS: 1-Reset Counters
Menu 24.1 - System Maintenance - Status
Errors Tx B/s
0 222
0 0
0 0
0 0
0 0
0 0
0 0
0 0
WAN:
Line Status: Up
Upstream Speed: 608 kbps
Downstream Speed: 4000 kbps
ESC-Exit
Rx B/s Up Time
211 2:15:16
0 0:00:00
0 0:00:00
0 0:00:00
0 0:00:00
0 0:00:00
0 0:00:00
0 0:00:00
System Maintenance