Navigating The Smt Interface; Table 2-2 Main Menu Commands - ZyXEL Communications Prestige 642R Series User Manual

2.8

Navigating the SMT Interface

The SMT (System Management Terminal) is the interface that you use to configure your Prestige.
Several operations that you should be familiar with before you attempt to modify the configuration are
listed in the table below.
Operation Press/<read>
Move down to [ENTER]
another menu
Move up to a [ESC]
previous menu
Move to a Press [SPACE
"hidden" menu BAR] to change
No to Yes then
press [ENTER].
[ENTER] or
Move the cursor
[Up]/[Down] arrow
keys
Enter Fill in, or
information
Press the [Space
bar] to toggle
Required fields
<
N/A fields <N/A>
[ENTER]
Save your
configuration
Type 99, then
Exit the SMT
press [ENTER].
Hardware Installation & Setup
Table 2-2
Description
To move forward to a sub-menu, type in the number of the
desired sub-menu and press [ENTER].
Press the [ESC] key to move back to the previous menu.
Fields beginning with "Edit" lead to hidden menus and have a
default setting of No. Press [SPACE BAR] to change No to Yes,
then press [ENTER] to go to a "hidden" menu.
Within a menu, press [ENTER] to move to the next field. You can
also use the [Up]/[Down] arrow keys to move to the previous and
the next field, respectively.
You need to fill in two types of fields. The first requires you to
type in the appropriate information. The second allows you to
cycle through the available choices by pressing the [Space] bar.
? All fields with the symbol <?> must be filled in order be able to
>
save the new configuration.
Some of the fields in the SMT will show a <N/A>. This symbol
refers to an option that is Not Applicable.
Save your configuration by pressing [ENTER] at the message
[Press ENTER to Confirm or ESC to Cancel]. Saving the data on
the screen will take you, in most cases, to the previous menu.
Type 99 at the Main Menu prompt and press [ENTER] to exit the
SMT interface.
Main Menu Commands
Prestige 642R Series ADSL Router
2-7