Table 5-2 Tcp/Ip Remote Node Configuration - ZyXEL Communications Prestige 642R Series User Manual

FIELD
VPI
VCI
Rem IP Adress
Rem IP Subnet
Mask
My Wan
Address
Single User
Account
Metric
Private
RIP Direction
Remote Node TCP/IP Configuration
Table 5-2 TCP/IP Remote Node Configuration
Enter the Virtual Path Identifier (VPI) number that your
telephone company supplies.
Enter the Virtual Channel Identifier (VCI) number that your
telephone company supplies.
This will show the IP address you entered for this remote node
in the previous menu.
Enter the subnet mask for the remote network.
Some implementations, especially the UNIX derivatives, require
the WAN link to have a separate IP network number from the
LAN and each end must have a unique address within the WAN
network number. If this is the case, enter the IP address
assigned to the WAN port of your Prestige.
NOTE: This is the address assigned to your local Prestige WAN,
not the remote router. If the remote router is a Prestige, then
this entry determines the local Prestige Rem IP Addr in Menu
11.1.
Set this field to Yes to enable the Single User Account feature
for your Prestige. Use the [space bar] to toggle between Yes
and No. See Chapter 3 – Internet Access Application for
more information on the Single User Account feature.
Metric represents the "cost" of transmission for routing purposes.
IP routing uses hop count as the measurement of cost, with a
minimum of 1 for directly connected networks. Enter a number
that approximates the cost for this link. The number need not be
precise, but it must be between 1 and 15. In practice, 2 or 3 is
usually a good number.
This parameter determines if the Prestige will include the route
to this remote node in its RIP broadcasts. If set to Yes, this route
is kept private and not included in RIP broadcast. If No, the
route to this remote node will be propagated to other hosts
through RIP broadcasts.
Press [space bar] to select from Both, In Only, Out Only or
None.
DESCRIPTION
Prestige 642R Series ADSL Router
OPTIONS
Yes or No
1 to 15
Yes or No
Both, In Only,
Out Only or
None
5-5