General Ethernet Setup; Protocol Dependent Ethernet Setup; Figure 2-11 Menu 3 - Ethernet Setup; Figure 2-12 Menu 3.1 - General Ethernet Setup - ZyXEL Communications Prestige 642R Series User Manual

2.11.1 General Ethernet Setup

This menu allows you to specify filter set(s) that you wish to apply to the Ethernet traffic. You seldom
need to filter Ethernet traffic; however, the filter sets may be useful to block certain packets, reduce traffic
and prevent security breaches.
If you need to define filters, please read the Filter Set Configuration chapter first, then return to this menu
to define the filter sets.

2.12 Protocol Dependent Ethernet Setup

Depending on the protocols for your applications, you need to configure the respective Ethernet Setup, as
outlined below.
For TCP/IP Ethernet setup refer to Chapter 3 - Internet Access Application.
For Novell IPX Ethernet setup refer to Chapter 6 - IPX Configuration.
For bridging Ethernet setup refer to Chapter 7 - Bridging Setup.
Hardware Installation & Setup
Menu 3 - Ethernet Setup
1. General Setup
2. TCP/IP and DHCP Setup
3. Novell IPX Setup
4. Bridge Setup
Enter Menu Selection Number:
Figure 2-11
Menu 3.1 - General Ethernet Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
Figure 2-12 Menu 3.1 - General Ethernet Setup
Menu 3 - Ethernet Setup
Prestige 642R Series ADSL Router
2-11