Figure 6-7 Menu12.2 - Ipx Static Route Setup; Figure 6-8 Menu 12.2.1 - Edit Ipx Static Route; Table 6-3 Edit Ipx Static Route Menu Fields - ZyXEL Communications Prestige 643 User Manual

Prestige 643 ADSL Router
Step 2. Type in 2, from Menu 12, to display the following screen.
Step 3. Select one of the IPX Static Routes to open Menu 12.2.1 – Edit IPX Static Route, as shown
next.
The following table contains instructions on how to configure the Edit IPX Static Route Menu.
FIELD
This is the index number of the route as listed in Menu 12.2 – IPX Static Route Setup.
Route #
Server Name In this field, enter the name of the server. This must be the exact name configured in
the NetWare server.
Active Choose Yes to activate and No to deactivate this static route.
Network # This field contains the internal network number of the remote server that you wish to
access ([00000000] and [FFFFFFFF] are reserved).
Node # This field contains the address of the node on which the server resides. If you are
using a Novell IPX implementation, this value is [000000000001].
6-8
Menu 12.2 – IPX Static Route Setup
1. routename
2. _________
3. _________
4. _________
Enter selection number:

Figure 6-7 Menu12.2 - IPX Static Route Setup

Menu 12.2.1 - Edit IPX Static Route
Route #= 1
Server Name= ?
Active= Yes
Network #= ?
Node #= 000000000001
Socket #= 0451
Type #= 0004
Hop Count= 2
Tick Count= 3
Gateway Node= 1
Press ENTER to Confirm or ESC to Cancel:

Figure 6-8 Menu 12.2.1 - Edit IPX Static Route

Table 6-3 Edit IPX Static Route Menu Fields

DESCRIPTION
IPX Configuration