Power Up Your Prestige; Figure 2-5 P642 With Isdn; Figure 2-6 Power-On Display - ZyXEL Communications Prestige 642R Series User Manual

The following is an example installation for the P642 with ISDN.
2.7

Power Up Your Prestige

At this point, you should have connected the console port, the ADSL line, the Ethernet port and the power
port to the appropriate devices or lines. You can now apply power to the Prestige.
Step 1. Initial Screen
When you power up your Prestige, it performs several internal tests as well as line initialization. After the
initialization, the Prestige asks you to press [ENTER] to continue, as shown.
Copyright (c) 1994 - 2000 ZyXEL Communications Corp.
initialize ch =0, ethernet address: 00:a0:c5:01:23:45
HWSAR (FPGA) : programming (11969) ... done
HWSAR (FPGA) : testing ... done
Wan Channel init ........ done
Loading ADSL modem F/W
............................................... done
Press ENTER to continue...
Step 2. Entering Password
The login screen appears after you press [ENTER], prompting you to enter the password, as shown below.
Hardware Installation & Setup
Figure 2-5 P642 with ISDN
Figure 2-6 Power-On Display
Prestige 642R Series ADSL Router
2-5