Ethernet Setup - ZyXEL Communications Prestige 642R Series User Manual

Prestige 642R Series ADSL Router
Field
System Name
Location
(optional)
Contact Person's
Name (optional)
Protocols:
Route IP Set this field to Yes to enable IP routing. You must enable IP routing
Route IPX Set this field Yes to enable IPX routing.
Bridge Turn on/off bridging for protocols not supported (e.g., SNA) or not

2.11 Ethernet Setup

This section describes how to configure the Ethernet using Menu 3 – Ethernet Setup. From the Main
Menu, enter 3 to open Menu 3.
2-10
Menu 1 - General Setup
System Name= ?
Location=
Contact Person's Name=
Route IP= Yes
Route IPX= No
Bridge= No
Press ENTER to Confirm or ESC to Cancel:
Figure 2-10
Table 2-4
Description
Choose a descriptive name for identification purposes. This name can
be up to 30 alphanumeric characters long. Spaces are not allowed, but
dashes "-" and underscores "_" are accepted.
Enter the geographic location (up to 31 characters) of your Prestige.
Enter the name (up to 30 characters) of the person in charge of this
Prestige.
Press [SPACE BAR] to toggle routing on or off for the individual
protocols.
for Internet access.
turned on in the previous Route fields.
Menu 1 - General Setup
General Setup Menu Fields
Example
P642
MyHouse
JohnDoe
Yes/No
Yes/No
Yes/No
Hardware Installation & Setup