Lan Port Filter Setup; Protocol Dependent Ethernet Setup; Figure 2-13 Menu 3 - Lan Setup; Figure 2-14 Menu 3.1 - General Ethernet Setup - ZyXEL Communications Prestige 650ME User Manual

2.12.1 LAN Port Filter Setup

This menu allows you to specify filter set(s) that you wish to apply to the Ethernet traffic. You seldom need
to filter Ethernet traffic; however, the filter sets may be useful to block certain packets, reduce traffic and
prevent security breaches.
If you need to define filters, please read the Filter Set Configuration chapter first, then return to this menu
to define the filter sets.

2.13 Protocol Dependent Ethernet Setup

Depending on the protocols for your applications, you need to configure the respective Ethernet Setup, as
outlined next.
For TCP/IP Ethernet setup refer to Internet Access Application.
For bridging Ethernet setup refer to Bridging Setup.
Hardware Installation and Initial Setup
Menu 3 – LAN Setup
1. LAN Port Filter Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
Figure 2-13 Menu 3 – LAN Setup
Menu 3.1 – LAN Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
Figure 2-14 Menu 3.1 – General Ethernet Setup
Prestige 650ME ADSL Bridge
2-17