Power On Your Prestige; Figure 2-3 Power-On Display; Figure 2-4 Login Screen - ZyXEL Communications Prestige 681 User Manual

•
Use caution when installing or modifying telephone lines (other than a cordless telephone) during
an electrical storm. There is a remote risk of electric shock from lightning.
•
Do not use a telephone or other equipment connected to telephone lines to report a gas leak in the
vicinity of the leak.
2.6

Power On Your Prestige

At this point, you should have connected the console port, the SDSL line, the Ethernet port and the power
port to the appropriate devices or lines. You can now apply power to the Prestige by turning the switch on.
Step 1. Initial Screen
When you power on your Prestige, it performs several internal tests as well as line initialization.
Copyright (c) 1994 - 2000 ZyXEL Communications Corp.
initialize ch =0, ethernet address: 00:a0:c5:33:86:81
Start to initialize SDSL.....
Step 2. Entering Password
The login screen appears prompting you to enter the password, as shown below.
For your first login, enter the default password 1234. As you type the password, the screen displays a (X)
for each character you type.
Please note that if there is no activity for longer than 5 minutes after you log in, your Prestige will
automatically log you out and will display a blank screen. If you see a blank screen, press [ENTER] to
bring up the login screen again.
Installation & Setup
Prestige 681 SDSL Router
Figure 2-3 Power-On Display
Enter Password : XXXX
Figure 2-4 Login Screen
2-5