Figure 31 Bandwidth Management Wizard: Service Configuration; Table 14 Bandwidth Management Wizard: General Information; Table 15 Bandwidth Management Wizard: Service Configuration - ZyXEL Communications P-2602R-DxA Series User Manual

P-2602R/RL-DxA Series User's Guide
The following fields describe the label in this screen.

Table 14 Bandwidth Management Wizard: General Information

LABEL
Active
Back
Next
Exit
4 If you select Service Setup, use the second wizard screen to select the services that you
want to apply bandwidth management and select the priorities that you want to apply to
the services listed.

Figure 31 Bandwidth Management Wizard: Service Configuration

The following table describes the labels in this screen.

Table 15 Bandwidth Management Wizard: Service Configuration

LABEL
Active
Service
70
DESCRIPTION
Select the Active check box to have the ZyXEL Device apply bandwidth
management to traffic going out through the ZyXEL Device's WAN or LAN port.
Select Auto Classifier to automatically allocate bandwidth to packets based on the
packet size or Services Setup to allocate bandwidth based on the service
requirements.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
DESCRIPTION
Select Active to enable bandwidth management for service specified traffic.
Select an entry's Active check box to turn on bandwidth management for the service/
application.
These fields display the services names.
Chapter 5 Bandwidth Management Wizard