Figure 92 Static Route; Table 63 Static Route - ZyXEL Communications P-2602R-DxA Series User Manual

P-2602R/RL-DxA Series User's Guide

Figure 92 Static Route

The following table describes the labels in this screen.

Table 63 Static Route

LABEL
#
Active
Name
Destination
Gateway
Modify
Apply
Cancel
184
DESCRIPTION
This is the number of an individual static route.
This field shows whether this static route is active (Yes) or not (No).
This is the name that describes or identifies this route.
This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
This is the IP address of the gateway. The gateway is a router or switch on the same
network segment as the device's LAN or WAN port. The gateway helps forward
packets to their destinations.
Click the edit icon to go to the screen where you can set up a static route on the
ZyXEL Device.
Click the delete icon to remove a static route from the ZyXEL Device. A window
displays asking you to confirm that you want to delete the route.
Click Apply to save your changes to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
Chapter 15 Static Route