Displaying Logs; Figure 175 Displaying Log Parameters Example - ZyXEL Communications P-2602R-DxA Series User Manual

Figure 175 Displaying Log Parameters Example

ras> sys logs category access
Usage: [0:none/1:log/2:alert/3:both]
ras>
4 Use
sys logs category
record.
Use 0 to not record logs for that category, 1 to record only logs for that category, 2 to
record only alerts for that category, and 3 to record both logs and alerts for that category.
Not every parameter is available with every category.
5 Use the
do this in order to record logs).

Displaying Logs

• Use the
log.
• Use the
log categories.
• Use the
individual ZyXEL Device log category.
• Use the
Appendix H Log Descriptions
followed by a log category and a parameter to decide what to
command to store the settings in the ZyXEL Device (you must
sys logs save
command to show all of the logs in the ZyXEL Device's
sys logs display
sys logs category
sys logs display [log category]
command to erase all of the ZyXEL Device's logs.
sys logs clear
P-2602R/RL-DxA Series User's Guide
display command to show the log settings for all of the
command to show the logs in an
313